1. Introduction of Product

16-50mm Four Cavity PVC Pipe Extrusion Production Line

4 cavity PVC electrical tube, water supply pipe extrusion line can extrude four pipes at same time on one machine. This line can save invesrment cost in factory building and production, which increase the capacity a lot and reduce production time. SJSZ65 conical twin-screw extruder can easily reach 5.5-6.5ton/per day, the production speed take 16mm as example can get more than 8-10m/min.

The whole line is composed of conical twin screw extruder Ø65mm, 4 cavity mould, 4 cavity cooling calibration tank, 4 station haul-off, 4 station cutter, and 4 station tipping table.

2. Quick Detail:

Raw material+additive→mixing→conveying feeding→force feeding→conical double screw extruder→one module four pipe mould→calibrator→four spray vacuum calibration tank→ink printer→four belt haul-off→four uplift cutter→four pipe rack→finished product inspecting & packing

3. Description:

1. Suitable diameter: Ø16- Ø50mm;
2. Four station haul-off: up-down two caterpillar tracking;
3. Drawing speed:1-10m/min;
4. Drawing forth: 6000N

4. Applications:

Mainly applying in water-supply pipe, drainage pipe, electrical threading pipe and other area.

5. Specifications:

6. Competitive Advantage:

This extrusion line, equipped with high-efficient& energy-saving twin conical screw extruder, produces PVC pipes four outlet at once by specially designed die mould. Which means high-efficient energy-saving, increasing extrusion speed, economical occupied saving, and low human cost. The non-scrap cutting unit controlled by inverter independently, arrange able cutting speed, compacted by half to ensure long service life and flat and smooth cutting surface without dust trouble. Special designed automatic controlled system with good features of easy operation, the whole line linkage, failure alarms, high-efficient control, and stable extrusion.

7. Service:

1. Oversea installation guide.

2. Oversea test running

3. Ovsersea worker training

4. Technical support

5. Spare parts supply

6. Technical operation support

7. Formula and processing support

8. Option

4 cavity PVC electrical tube(16-50mm0, water supply pipe extrusion line can extrude four pipes at same time on one machine. This line can save investment cost in factory building and production, which increase the capacity a lot and reduce production time. SJSZ65 conical twin-screw extruder can easily reach 5.5-6.5 ton per day, the production speed take 16mm as example can get more than 8-10m/min.

Take whole line is composed of conical twin screw extruder Ø65mm, 4 cavity die head, 4 cavity cooling calibration tank, 4 station haul-off, 4 station cutter, and 4 station tinpping table.

9. Commercial Terms

1. Payment: 30% by T/T as advance payment, balance(70%) by T/T before shipment

2. Lead Time: 60 days after receiving the advance payment

3. Transportation: container, simple package ( PE film, salver)

4.Warranty period: From the day of the use of the machine in the buyer’s factory:

(1) The mechanical Parts: 12 months

(2) The electrical Parts: 6 months

5. Installations and Commissioning

(1) Up to date commissioning has been made before shipment

(2) Overseas Commissioning and charges

one or two technicians will be sent to the buyer to guide the installation and commissioning of the equipment if the customer requests.

Customers pay the charge of our technicians.

(1) Round-trip Airplane Ticket

(2) Charges of transportation, accommodation and communication

(3) The allowance for the technicians is USD 80 per day for one person.

(4) An interpreter is needed.

6. Spare parts:

Spare parts for one year are needed for the customers, and we suggest that customers should buy the spare parts. (Fittings list will be provided.)

7. English manual, Figuration drawing, and footing drawings are provided.

Zhangjiagang Flame Machinery Co., Ltd is located in national civilization hygienic city close to Shanghai, which is specialized in producing rubber and plastic machinery, including internal mixer, open mill, calendaring machine, extruder production line and recycling production line ,etc. We aim at providing the best quality of products and service to all customers, through continuously improving and developing.

Until now through continually practicing and improving, we already formed a high quality team including advanced talents. We have strictly control system in the products researching, producing, assembling, testing and deliver. Meanwhile we will ensure the market competitiveness and customer applicability by innovating and improving the design and quality of the product.

Flame company insists the management idea of “ excellent quality, integrity manage, high quality after-sales service” ,so that we can win more and more customer’s trust and support from home and abroad .Providing profitable machinery for customers and getting their acceptation are our final success!

Warmly welcomed domestic and oversea customers to visit and inspect our factory, creating mutual benefit for both of us!